X = suggested fixing point Cut the acoustic panels to fit your wall or ceiling. Cut the top panel with a sharp saw and the acoustic felt with a carpenter knife. 1. Plan your installation and decide whether the pattern of the panels should be continuous or whether you should rotate every other panel 180 degrees. 2. To achieve the highest absorption class for your chosen pattern, first regrade the wall with 45 mm battens, 600 mm cc, and place 45 mm thick mineral wool behind the panels. 3. If necessary, adjust the length of the panels to the correct size. Use a sharp saw for the top panel and a knife for the felt. 4. Install with at least 15 fixing points per panel. Choose the mounting method (screwed, glued or stapled) depending on the wall material and location. Glue is recommended for wall mounting only. In this case, use an MS polymer adhesive and fix the panel during curing. 5. If you are installing in combination with Lamellow , add a felt strip to the Lamellow panel and install with the felt edge against the Figura panel to create a consistent spacing.
