NEW 10A RC TX Controlled Relay Switch PWM Receiver LED Control Spray Switch A versatile relay switch with safe-protection feature and LED control Load Current Max: 10A Input Voltage (V): 5-28V RX lead length: 100mm Power lead length: 100mm Cable Size (AWG): 20 Top Features: Reads pulse width from 400 to 2600us Safe-protection function for unexpected activation prevention LED indication for normal and safe-protection modes Requires 5V supply for proper functioning The module can read a pulse width ranging from 400 to 2600us. If the pulse width is more than 1800us, the MOSFET switch will close; if less than 1200us, the switch will open. This module includes a safe-protection feature to reduce unexpected activations. The safe-protection mode will activate under two conditions: If the pulse is more than 1800us at first power-up, the MOSFET switch will open. The LED will blink, requiring the input to be moved to the off position for normal mode activation. If the signal is continuously bad for 500ms, the MOSFET switch will open, and the LED will blink. The device will deactivate safe-protection mode once the signal is good. LED behavior in normal mode: The LED will be on when the input pulse is greater than 1800us and off when less than 1200us. In safe-protection mode, the LED will fast blink. When using the electronic switch, ensure a 5V supply to the receiver. Operating at a voltage greater than 5V may lead to improper functioning. Additionally, the remote control channel needs more than 3 channels for compatibility. * Images are for illustration only; actual product may vary.
