Mechanically driven machine. The step of pressing, cutting and end rounding is carried out with the levers of the forming chamber while the adjustment is made by means of a yoke with a numerical scale MACHINE CARE To allow the machine to operate correctly and above all to ensure a long service life, we recommend regular cleaning, both inside and out (see operation manual, chapter/ paragraph on cleaning). The stainless steel parts, painted coatings, PE500 polyethylene and PETG plates can be cleaned simply using water and soap or a neutral detergent, then rinsed thoroughly and dried with a soft cloth. MATERIALS USED Frame in electro-welded, painted steel; Coating in painted steel or stainless steel. Basins in anticorodal aluminium MG5 with anodising; Knives and grids in stainless steel 304; Inner cover surface and presses in polyethylene for foodstuff use PE500; Plates in polyethylene for foodstuff use PETG; Ring in aluminium with chemical nickel-plating. ELECTRICAL POWER SUPPLY All machines are provided standard for an operating voltage of 400 Volt 50 Hz 3-phase. Other voltages can be provided on request. All machines are in conformity with EC regulations and are manufactured in Italy.
