MONEYWITHINTERNET.NL ≡ 3D Accessories Lidar Sensor Ic’s 3D Wanddecoratie
  • Micro Controller Accessories

  • Particle Argon IoT Development Kit

Particle Argon IoT Development Kit

$79.29 $136.38
The Particle Argon is an IoT development board that allows you to connect your mesh network to Wi-Fi. With the Nordic nRF52840 SoC and an ESP32 you have all the power of an ARM Cortex M4 with OpenThread mesh networking, Wi-Fi (b/g/n), NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone Wi-Fi endpoint or a Wi-Fi enabled gateway for a Particle Mesh network. The Argon is also configured in the popular Feather footprint making it also compatible with Feather Shields! That means it includes a JST connector for a LiPo battery as well as charging of the battery over USB. Particle also provides an RGB status LED and a JTAG (SWD) connector for debugging and an onboard PCB antenna for your mesh network (you will need a U.FL antenna for NFC or Wi-Fi) The Argon comes with access to the Device Cloud (10 free micro networks available) as well as three free months of device Cloud access using a cellular gateway. The Particle Could have some great features for building connected projects, including over-the-air firmware updates, an easy-to-use REST API, and firmware development supported by web and local IDEs. Features: Espressif ESP32-D0WD 2.4GHz Wi-Fi coprocessor On-board 4MB flash for eSP32 802.11 b/g/n support 802.11 n (2.4GHz), up to 150Mbps Nordic Semiconductor nRF52840 SoC ARM Cortex-M4F 32-bit processor @ 64MHz 1MB flash, 256KB RAM IEEE 802.15.4 – 2006: 250Kbps Bluetooth 5: 2Mbps, 1Mbps, 500Kbps, 125Kbps Supports DSP instructions, HW accelerated Floating Point Unit (FPU) calculations ARM TrustZone CryptoCell-310 Cryptographic and security module Up to 8 dBm TX power (down to -20dBm in 4dB steps) NFC-A tag On-board additional 4MB SPI flash 20 mixed signal GPIO (6x Analog, 8x PWM), UART, I2C, SPI Integrated Li-Po charging and battery connector JTAG (SWD) Connector RGB status LED Reset and Mode buttons On-board PCB antenna for mesh network u.FL connectors for external antennas for the mesh network, Wi-Fi, and NFC FCC, CE, and IC certified. RoHS compliant Useful Links: Schematic Datasheet Pin Layout OpenThread Device Cloud Github Package Includes: 1 x Particle Argon IoT Development Kit Category: Advance Controller Board
Micro Controller Accessories

Micro Controller Accessories

  • Bonka 11.1V 5200mAh 35C 3S Lithium Polymer Battery Pack
    $54.31 $84.17
  • Particle Argon IoT Development Kit
    $79.29 $136.38
  • Straight Pin Male Header Strip.
    $71.19 $140.24
  • SeeedStudio Grove Creator Kit – Beta (30 in 1 Sensor Kit)
    $47.08 $92.75
  • MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
    $42.04 $69.36
  • LM2576T-5 - Step-Down 5V Regulator (pack of 10)
    $38.8 $59.75
  • SeeedStudio Grove Creator Kit – Gamma (40 in 1 Sensor Kit)
    $51.11 $66.96
  • DOBOT MOOZ 3Z Color Mixing 3D Printer
    $69.26 $115.66
  • White ABS Case for Mega 2560
    $36.24 $44.94
  • PIC16F688 Flash 4kbyte 8MHz Microcontroller with ADC and USART
    $56.87 $106.35
  • Mini Vibration Vibrating Electric Toys Motor DC 1.5-6V 14000RPM for Arduino
    $69.25 $119.1
  • Hx750 DIY mini Drone set - 1 pcs Transmitter Remote 1pcs Receiver Board 4 pcs coreless motor 4 pcs Propeller 1 pcs 220 mah battery 1pcs 3.7v Usb type Lipo charger
    $70.27 $95.57

© 2026 - MONEYWITHINTERNET.NL